Product Details
ARDEX X 3 T
Wall & Floor Tile Adhesive
- Cement based
- Slip resistant
- Water resistant
- Frost resistant
- High strength
- Easy and convenient application
- Very low emmissions
ARDEX X 3 T Tile Adhesive: Superior Performance and Durability
ARDEX X 3 T is a cement-based ceramic adhesive that offers non-slip properties and high adhesive strength. It can be used for wall and floor applications both indoors and outdoors. Its water and frost-resistant composition ensures long-lasting usage. With its easy-to-apply consistency and very low emissions, it is environmentally friendly. Special additives enhance adhesive strength and ensure quick drying. As a ceramic adhesive, it shows excellent performance in the installation of materials such as ceramic tiles, mosaics, and natural stones. This product is compatible with underfloor heating systems and is resistant to high temperatures and humidity.
Also Available in White: Learn more about ARDEX X 3 T-W
Application Areas
Indoors and outdoors, on walls and floors. For the application of ceramic tiles, mosaics, thermal insulation boards, and natural stones that are not sensitive to moisture in both indoor and outdoor living spaces.
Product Type
A thin-bed adhesive mortar containing special additives that provide cement, fillers, non-slip properties, long working time, and increased adhesive strength. When mixed with water, it forms a spreadable adhesive mortar that becomes resistant to water and weather conditions within a few days after hydration and drying.
ARDEX X 3 T provides excellent adhesion to concrete, cement, and calcium sulfate screeds, plaster, cement and gypsum plastered walls, gypsum boards, and similar subfloors, ensuring a strong bond with the overlaying material.
Packaging
25 kg kraft bag
Storage & Shelf Life
In its original unopened packaging, protected from sunlight and frost, it can be stored for approximately 12 months in a dry and cool environment.
Mixing Ratio
7.25 liters of water per 25kg bag
Bulk Density
Approx. 1.5 kg/l
Weight of Fresh Mortar
Approx. 1.6 kg/l
Material Requirement
Depending on the substrate and the trowel size; (approx.)
3x3x3mm 2.0 kg powder/m²
6x6x6mm 2.5 kg powder/m²
8x8x8mm 3.0 kg powder/m²
Working Time/Pot Life*:
Approx. 3 hours
Open Time*:
Approx. 20 minutes
Fixing Time*:
Approx. 10 – 15 minutes
Walkability*:
Gets walkable and groutable after approx. 24 hours.
Grouting*:
Approx. 24 hours on floors, 8 hours on walls
*All data is approximately based on laboratory test made at a temperature of +20°C and relative humidity of %65. Environmental conditions may change these values. Higher temperatures and lower relative humidity decrease these duration whereas lower temprature and higher relative humidty increases them.
Suitable for Underfloor Heating
Yes
EMICODE:
EC 1 Plus – Very Low Emmissions
GHS/CLP Classification:
GHS 05, Corrosive
GGVSEV/ADR Classification
None
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information about tile adhesive application, especially ARDEX X 3 T, please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
How do I choose the right tile adhesive for my project?
Consider the type of tiles, the surface you’re bonding to, the environmental conditions, and specific requirements like flexibility and water resistance. Always refer to the product specifications.
What is the difference between thin-set mortar and tile adhesive?
Thin-set mortar is a type of tile adhesive designed to be applied in a thin layer, typically 3-6 mm thick, and is used for bonding tiles to floors and walls.
What types of materials can ARDEX X 3 T bond?
ARDEX X 3 T can bond ceramic tiles, mosaics, natural stones, and insulation boards.
Is ARDEX X 3 T suitable for high-traffic areas?
Yes, ARDEX X 3 T is durable and provides high bonding strength, making it suitable for high-traffic areas.
Can ARDEX X 3 T be used in wet environments?
Yes, ARDEX X 3 T is water and frost resistant, making it suitable for wet environments like bathrooms and exterior applications.
What is the working time for ARDEX X 3 T?
The product has a working time of approximately 3 hours, allowing ample time for application and adjustments.
What is the mixing ratio for ARDEX X 3 T?
Mix 25 kg of powder with 7.25 liters of water to achieve the optimal consistency.
How long after application can the surface be walked on or grouted?
The surface can be walked on and grouted after approximately 24 hours, with wall grouting possible after about 8 hours.
Is ARDEX X 3 T suitable for use with underfloor heating systems?
Yes, ARDEX X 3 T is compatible with underfloor heating systems and resistant to high temperatures and humidity.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.