Product Details
Loba V6 Finish
PU-Based Maintenance Solution
- Long-lasting protection against wear
- Extends the renewal cycle and surface lifespan
- Revitalizes used floors, concealing wear marks and fine scratches
- Universally applicable on a variety of surfaces
- High resistance to foot traffic marks
LOBA V6 Finish: PU-Based Maintenance Solution
LOBA PU-Based Maintenance Solution offers long-lasting protection against wear for polished floors. This permanent polyurethane dispersion revitalizes used surfaces, conceals scratches, and extends the lifespan of flooring materials. Suitable for various waterproof surfaces, it can be walked on within 1-2 hours and fully loaded after 12 hours, making it ideal for high-traffic areas.
Product Type
PU-based maintenance solution. A permanent polyurethane dispersion maintenance product. Provides lasting protection for polished floors. Offers additional protection for newly installed floors and prevents early wear. Revitalizes used floors, concealing surface wear marks and small scratches while extending the renewal cycle and surface lifespan.
Areas of Use
Suitable for the maintenance of extra matte and matte polished wooden floors, cork coverings, linoleum, PVC coverings, and other waterproof surfaces.
Important Considerations
- The material must be well-shaken before application.
- The product is ready for application and should not be diluted!
- Clean loose dirt and dust beforehand using a vacuum, broom, or mop, and then damp wipe the surface with LOBA CleanFix or Cleaner.
- Stubborn dirt and residue from old maintenance products should be removed through a preliminary cleaning process with LOBA CareRemover. Please refer to the technical information of the relevant products.
- For large areas, use a suitable flat mop with a material requirement of 30-40 ml(g)/m² = 25-35 m²/l(kg) = 3-4l/100 m².
- The surface can be walked on 1-2 hours after application, and full loading and traffic can occur after 12 hours.
- V6 Finish cannot be completely removed from polished parquet, wood, and cork coverings or linoleum through basic cleaning. Adhesion issues may arise with newly installed, factory-finished polished elements. Pre-tests are essential in these cases. A preliminary cleaning with LOBA CareRemover often ensures sufficient adhesion.
- The material is poured onto the floor in sections and then applied in an even coat. Leave the application tool as flat as possible on the floor and do not lift it, working without applying pressure. Start from one side of the room and work towards the opposite side, where the exit door is located. The entire maintenance of a room should be completed.
- Never work on the floor again during the drying process, as this can cause roller marks.
Packaging
Available in 1 and 5-liter containers.
Shelf Life and Storage
Can be stored for approximately 24 months in its original unopened packaging in dry, cool places at temperatures between +5°C and +25°C.
Walkability*
Can be walked on after 1-2 hours.
Full Loading and Closure*
Can occur after 12 hours.
Material Requirements
Approximately 100 m² / 3 – 4 L
pH
8.4
GISCODE
GE10
Frequently Asked Questions About LOBA® V6 Finish
What is LOBA® V6 Finish?
LOBA® V6 Finish is a PU-based maintenance solution. It is a permanent polyurethane dispersion maintenance material designed to provide lasting protection for polished floors. It offers additional protection to newly installed floors, prevents early wear, refreshes used floors, and covers surface wear marks and minor scratches, thereby extending the renewal cycle and surface lifespan.
What are the benefits of using LOBA® V6 Finish?
Using LOBA® V6 Finish offers several advantages:
- Permanent Protection: Provides long-lasting protection for polished floors.
- Prevents Early Wear: Stops early surface wear, keeping floors looking new for longer.
- Surface Renewal: Refreshes used floors by covering surface wear marks and minor scratches.
- Extended Lifespan: Extends the renewal cycle and surface lifespan, offering cost savings.
- Easy Application: Simple to apply, ensuring professional results with minimal effort.
What types of surfaces can I apply LOBA® V6 Finish on?
LOBA® V6 Finish is suitable for the maintenance of extra matte and matte-polished wooden floors, cork coverings, linoleum, PVC coverings, and other waterproof surfaces.
How do I apply LOBA® V6 Finish?
To effectively apply LOBA® V6 Finish, follow these best practices:
- Prepare the Surface: Ensure the surface is dry, clean, and free from old layers, grease, silicone, sanding dust, and other contaminants.
- Shake Well: Shake the product thoroughly before application to ensure proper mixing.
- Mix Properly: Pour the material into a bucket and mix well before applying with a roller. Do not pour the product directly onto the floor.
- Apply Evenly: Use a suitable flat mopping roller to apply the material evenly across the floor. Start from one side of the room and work towards the opposite side, ensuring complete coverage. Avoid working on the floor again during the drying process to prevent roller marks.
What are the important considerations when using LOBA® V6 Finish?
When using LOBA® V6 Finish, keep the following considerations in mind:
- Shake Before Use: Ensure the product is well-shaken to maintain consistency.
- Remove Loose Dirt: Clean loose dirt and dust using a vacuum cleaner, broom, or mop before applying the finish.
- Apply Correctly: Use the finish as per the recommended dosage to prevent excessive application.
- Avoid Dilution: The product is ready for application and should not be diluted.
- Surface Walkability: The surface can be walked on 1-2 hours after application and fully loaded after 12 hours.
- Preventing Residue Issues: Ensure that V6 Finish cannot be removed from polished parquet, wooden, cork, and linoleum floors through basic surface cleaning methods like scrubbing, as it permanently bonds to these surfaces.
- Adhesion Issues: Newly installed, factory-finished floors may experience adhesion problems. Pre-cleaning with LOBA CareRemover can enhance adhesion in many cases.
- Application Technique: Pour the material in sections and apply evenly. Do not lift or press the application tool excessively to avoid roller marks. Complete the maintenance of one room before moving to the next.
How should I store LOBA® V6 Finish to maintain its effectiveness?
LOBA® V6 Finish should be stored in its original, unopened packaging in a cool, dry environment with temperatures between +5°C and +25°C. Keep the product away from frost, direct sunlight, and heat sources. Once opened, ensure the packaging is tightly sealed to prevent contamination and maintain the product’s efficacy.
What is the shelf life of LOBA® V6 Finish?
LOBA® V6 Finish can be stored for approximately 24 months in its original, unopened packaging in a cool, dry environment between +5°C and +25°C, away from frost.
What is the pH of LOBA® V6 Finish?
The pH of LOBA® V6 Finish is 8.4, making it suitable for sensitive floors.
How much LOBA® V6 Finish do I need for my application?
The material requirement for LOBA® V6 Finish is approximately 100 ml/m² (or 3-4 liters per 100 m²). For large areas, using a suitable flat mopping roller requires approximately 30-40 ml/g/m² = 25-35 m²/l (kg) = 3-4 liters/100 m² of material.
What safety precautions should I take when using LOBA® V6 Finish?
When using LOBA® V6 Finish, follow these safety precautions:
- Work in a Well-Ventilated Area: To avoid inhaling fumes.
- Wear Protective Gear: Such as gloves and safety glasses to prevent skin and eye contact.
- Follow Instructions: Adhere to the manufacturer’s instructions and safety data sheets for safe handling and application.
- Avoid Incompatible Materials: To prevent chemical reactions.
How long does it take for LOBA® V6 Finish to dry and set?
The drying and setting time for LOBA® V6 Finish is as follows:
- Walkability: Can be walked on after approximately 1-2 hours.
- Full Loading and Closure: Can occur after 12 hours.
Environmental factors such as temperature and humidity can affect these times. The specified drying times apply at +20°C and relative humidity between 50%, as well as careful ventilation of work areas and absence of drafts. Lower temperatures, higher humidity levels, and poor ventilation may delay drying. Do not perform wet cleaning or lay carpets before the finish has cured.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.