Product Details
ARDEX X 3 T-W
Wall & Floor Tile Adhesive, White
- Cement based
- Slip resistant
- Water resistant
- Frost resistant
- High strength
- Easy and convenient application
- Very low emmissions
ARDEX X 3 T-W White Ceramic Adhesive:
Superior Performance and Durability
ARDEX X 3 T-W is a cement-based ceramic adhesive offering non-slip properties and high bonding strength. It is suitable for both interior and exterior applications on walls and floors. Its water and frost-resistant properties ensure long-lasting use. With an easy-to-apply consistency and very low emissions, it is environmentally friendly. Special additives enhance its bonding strength and allow for quick drying. As a ceramic adhesive, it performs exceptionally well in the installation of materials such as ceramic tiles, mosaics, and natural stones. This product is compatible with underfloor heating systems and resistant to high temperatures and humidity.
Also Available in Gray: Learn more about ARDEX X 3 T
Applications
For interior and exterior use, on walls and floors. Suitable for the application of ceramic tiles, mosaics, insulation boards, and natural stones not sensitive to moisture, in both interior and exterior living spaces.
Product Type
A thin-bed adhesive mortar containing special additives that provide effects such as increased bonding strength, non-slip properties, and long working time. When mixed with water, it forms a spreadable adhesive that becomes water and weather-resistant within a few days after hydration and drying.
ARDEX X 3 T-W provides a strong, insoluble bond with the overlay material when applied to substrates such as concrete, cement, and calcium sulfate screeds, plaster, cement and gypsum plastered walls, plasterboard, etc.
Packaging
25 kg kraft bag
Shelf Life and Storage
Can be stored for approximately 12 months in its original unopened packaging in a dry, cool environment, protected from sunlight and frost.
Mixing Ratio
7.25 liters of water per 25 kg of powder
Dry Powder Density
Approximately 1.50 kg/l
Fresh Mortar Density
Approximately 1.60 kg/l
Material Requirement
3x3x3mm: 2.0 kg powder/m²
6x6x6mm: 2.5 kg powder/m²
8x8x8mm: 3.0 kg powder/m²
Working Time /Pot Life*
Approximately 3 hours
Open Time*
Approximately 20 minutes
Fixing Time*
Approximately 10 – 15 minutes
Walkability*
Can be walked on and grouted after approximately 24 hours.
Grouting Time*
Approximately 24 hours for floors, and 8 hours for walls.
* These approximate values are calculated in laboratory conditions at +20°C and 65% relative humidity. Environmental and weather conditions may alter these values. Higher temperatures and lower relative humidity shorten these times, while lower temperatures and higher relative humidity extend them.
Suitable for Underfloor Heating
Yes
EMICODE:
EC 1 Plus – Very Low Emmissions
GHS/CLP Classification:
GHS 05, Corrosive
GGVSEV/ADR Classification
None
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information about tile adhesive application, especially ARDEX X 3 T-W, please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
How do I choose the right tile adhesive for my project?
Consider the type of tiles, the surface you’re bonding to, the environmental conditions, and specific requirements like flexibility and water resistance. Always refer to the product specifications.
What is the difference between thin-set mortar and tile adhesive?
Thin-set mortar is a type of tile adhesive designed to be applied in a thin layer, typically 3-6 mm thick, and is used for bonding tiles to floors and walls.
What types of materials can ARDEX X 3 T-W bond?
ARDEX X 3 T-W can bond ceramic tiles, mosaics, natural stones, and insulation boards.
Is ARDEX X 3 T-W suitable for high-traffic areas?
Yes, ARDEX X 3 T-W is durable and provides high bonding strength, making it suitable for high-traffic areas.
Can ARDEX X 3 T-W be used in wet environments?
Yes, ARDEX X 3 T-W is water and frost resistant, making it suitable for wet environments like bathrooms and exterior applications.
What is the working time for ARDEX X 3 T-W?
The product has a working time of approximately 3 hours, allowing ample time for application and adjustments.
What is the mixing ratio for ARDEX X 3 T-W?
Mix 25 kg of powder with 7.25 liters of water to achieve the optimal consistency.
How long after application can the surface be walked on or grouted?
The surface can be walked on and grouted after approximately 24 hours, with wall grouting possible after about 8 hours.
Is ARDEX X 3 T-W suitable for use with underfloor heating systems?
Yes, ARDEX X 3 T-W is compatible with underfloor heating systems and resistant to high temperatures and humidity.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.