Product Details
ARDEX X 3 T
Wall & Floor Tile Ahdesive
- Cement based
- Slip resistant
- Water resistant
- Frost resistant
- High strength
- Easy and convenient application
- Very low emmissions
![TS EN 12004 C1T](https://www.ardex.com.tr/wp-content/uploads/2020/02/c1t-150x150.jpg)
![EMICODE EC1 PLUS](https://www.ardex.com.tr/wp-content/uploads/2017/06/emicode-150x150.jpg)
![Seramik Yapıştırıcısı Ambalajı](https://www.ardex.com.tr/wp-content/uploads/2020/02/ARDEX_X_3_T_AMBALAJ.webp)
ARDEX X 3 T Tile Adhesive: Superior Performance and Durability
ARDEX X 3 T is a cement-based ceramic adhesive that offers non-slip properties and high adhesive strength. It can be used for wall and floor applications both indoors and outdoors. Its water and frost-resistant composition ensures long-lasting usage. With its easy-to-apply consistency and very low emissions, it is environmentally friendly. Special additives enhance adhesive strength and ensure quick drying. As a ceramic adhesive, it shows excellent performance in the installation of materials such as ceramic tiles, mosaics, and natural stones. This product is compatible with underfloor heating systems and is resistant to high temperatures and humidity.
Areas of Use
Indoors and outdoors, on walls and floors. For the application of ceramic tiles, mosaics, thermal insulation boards, and natural stones that are not sensitive to moisture in both indoor and outdoor living spaces.
Product Type
A thin-bed adhesive mortar containing special additives that provide cement, fillers, non-slip properties, long working time, and increased adhesive strength. When mixed with water, it forms a spreadable adhesive mortar that becomes resistant to water and weather conditions within a few days after hydration and drying.
ARDEX X 3 T provides excellent adhesion to concrete, cement, and calcium sulfate screeds, plaster, cement and gypsum plastered walls, gypsum boards, and similar subfloors, ensuring a strong bond with the overlaying material.
Packaging
25 kg kraft bag
Storage & Shelf Life
In its original unopened packaging, protected from sunlight and frost, it can be stored for approximately 12 months in a dry and cool environment.
Mixing Ratio
7.25 liters of water per 25kg bag
Bulk Density
Approx. 1.5 kg/l
Weight of Fresh Mortar
Approx. 1.6 kg/l
Material Requirement
Depending on the substrate and the trowel size; (approx.)
3x3x3mm 2.0 kg powder/m²
6x6x6mm 2.5 kg powder/m²
8x8x8mm 3.0 kg powder/m²
Working Time/Pot Life*:
Approx. 3 hours
Open Time*:
Approx. 20 minutes
Fixing Time*:
Approx. 10 – 15 minutes
Walkability*:
Gets walkable and groutable after approx. 24 hours.
Grouting*:
Approx. 24 hours on floors, 8 hours on walls
*All data is approximately based on laboratory test made at a temperature of +20°C and relative humidity of %65. Environmental conditions may change these values. Higher temperatures and lower relative humidity decrease these duration whereas lower temprature and higher relative humidty increases them.
Suitable for Underfloor Heating
Yes
EMICODE:
EC 1 Plus – Very Low Emmissions
GHS/CLP Classification:
GHS 05, Corrosive
GGVSEV/ADR Classification
None
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.