Product Details
ARDEX K 55
Self-Leveling, Rapid Curing, Thin Screed
- Rapid drying and curing, ready for covering, hydraulic binder-based, self-leveling thin screed
- Can be covered with textile, PVC, LVT, linoleum, rubber, and parquet after just 60 minutes
- Improved spreading and low consumption properties
- High adhesion and bonding properties allow for primer-free application on many substrates
- Very fast application in both new and renovation projects
- Fast application even at high thicknesses
Usage Areas
Used indoors. Self-leveling thin screed for rapid and short-duration new and renovation applications on cement, gypsum-based, and similar substrates.
Product Features
A gray powder product composed of dispersion-based powder polymer and specially selected raw materials. When mixed with water, it forms a self-smoothing mortar with a suitable consistency that can be worked for 15 minutes and is walkable and ready for covering within 60 minutes after application.
General
The thickness should be at least 1.5 mm on solid and non-absorbent substrates. ARDEX K 55 can be applied up to a maximum thickness of 10 mm in a single application. For thicknesses between 10-20 mm, sand can be added to the ARDEX K 55 mortar in the following proportions:
- 0.3 parts by volume of 0-4 mm washed sand per 1 part by volume of mortar
- 0.5 parts by volume of 0-8 mm washed sand per 1 part by volume of mortar
Packaging
20 kg kraft bag
Shelf Life and Storage
Can be stored for approximately 24 months in a dry and cool environment in its original unopened packaging.
Rapid Curing Self-Leveling Thin Screed – ARDEX K 55
ARDEX K 55 is a self-leveling, rapid-curing thin screed ideal for indoor applications on various substrates. It is walkable and ready for covering in just 60 minutes, making it perfect for fast-paced projects.
Mixing Ratio
Approximately 5.0 liters of water per 20 kg powder
Dry Powder Density
Approximately 1.2 kg/l
Fresh Mortar Density
Approximately 1.8 kg/l
Material Requirement
Approximately 1.4 kg powder/m²-mm
Working Time*
Approximately 15 minutes
Walkable Time*
Approximately 60 minutes after application
Covering Time*
Approximately 60 minutes after application
*These values are approximate and calculated under laboratory conditions at +20°C and 65% relative humidity. Environmental and air conditions can alter these values. Higher temperatures and lower humidity shorten these times, while lower temperatures and higher humidity extend them.
Compressive Strength
Approximately 20 N/mm² after 1 day Approximately 30 N/mm² after 7 days Approximately 35 N/mm² after 28 days
Flexural Strength
Approximately 6 N/mm² after 1 day Approximately 8 N/mm² after 7 days Approximately 10 N/mm² after 28 days
Point Load Resistance
Approximately 40 N/mm² after 1 day Approximately 50 N/mm² after 7 days Approximately 60 N/mm² after 28 days
Suitability for Wheelchair Use
Suitable
Suitability for Underfloor Heating
Suitable
EMICODE
EC 1R – Low emission
GHS/CLP Classification
None
GGVSEV/ADR Classification
None
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information about self-leveling screed applications, especially ARDEX K 55, please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
What is rapid curing self-leveling screed?
Rapid curing self-leveling screed is a floor covering that quickly dries and cures, allowing for rapid application and covering. It spreads evenly across the floor without manual leveling.
How thick can I apply ARDEX K 55?
ARDEX K 55 can be applied at varying thicknesses, providing fast application even at high thicknesses.
How long before I can cover ARDEX K 55?
You can cover ARDEX K 55 with textile, PVC, LVT, linoleum, rubber, and parquet after just 60 minutes.
Is ARDEX K 55 suitable for underfloor heating?
Yes, ARDEX K 55 is suitable for use with underfloor heating systems.
Does ARDEX K 55 require a primer?
No, ARDEX K 55 has high adhesion and bonding properties, allowing for primer-free application on many substrates.
How do I mix ARDEX K 55?
Mix 20 kg of powder with approximately 5.0 liters of water to achieve a smooth, self-leveling mortar.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.