Product Details

ARDEX EP 2000

Multi Purpose Epoxy Primer

Solvent-free
Chemical resistant
Suitable for rolling and brushing
Easy to apply
High bonding strength
Two-component

ARDEX EP 2000: Multi-Purpose Epoxy Primer

ARDEX EP 2000 is a solvent-free, two-component epoxy primer designed for priming and strengthening surfaces, stopping rising moisture, and sealing cracks in screed and concrete. It is chemical-resistant, easy to apply, and suitable for rolling and brushing. The primer allows for walking in 6 hours and can handle mechanical loads in 24 hours and chemical exposure in 7 days. It has a shelf life of 12 months when stored properly.

MULTI-PURPOSE EPOXY PRIMER

Solvent-free
Chemical resistant
Suitable for rolling and brushing
Easy to apply
High bonding strength
Two-component

Usage Areas

To stop rising moisture.
Priming and strengthening surfaces.
Covering cracks in screed and concrete.
Providing adhesion.

Shelf Life

Can be stored for 12 months in original packaging in dry conditions protected from frost.

Mixing Ratio

As indicated on the packaging.

Density

Approximately 1.1 kg/liter

Material Requirement

For surface coatings: 300 g/m² per coat, depending on surface absorbency.
For sealing cracks and joints: Approximately 300 g/linear meter, depending on width and depth.

Working/Pot Life

Approximately 30 minutes at 20°C.

Walk-On Time

Approximately 6 hours at 20°C.

Load Application Time

Mechanical load: 24 hours after application
Chemical exposure: 7 days after application

Technical Data Sheet

Declaration of Performance

Safety Data Sheet for Hardener Component

Safety Data Sheet for Resin Component

EMICODE Certificate

IMPORTANT NOTE

This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.

What surfaces can ARDEX EP 2000 be used on?

ARDEX EP 2000 can be used on concrete and screed surfaces to stop rising moisture, prime and strengthen surfaces, cover cracks, and provide adhesion.

How do I mix ARDEX EP 2000 components?

Mix ARDEX EP 2000 components as indicated on the packaging to ensure proper application and performance.

Is ARDEX EP 2000 suitable for indoor use?

Yes, ARDEX EP 2000 is solvent-free and suitable for indoor use. It is safe and easy to apply with a roller or brush.

What is the shelf life of ARDEX EP 2000?

ARDEX EP 2000 has a shelf life of approximately 12 months when stored in its original unopened packaging, in dry conditions, and protected from frost.

What is the material requirement for ARDEX EP 2000?

The material requirement for ARDEX EP 2000 is approximately 300 g/m² per coat for surface coatings and approximately 300 g/linear meter for sealing cracks and joints, depending on their width and depth.

How long does ARDEX EP 2000 take to cure?

ARDEX EP 2000 allows for walking after approximately 6 hours and can handle mechanical loads after 24 hours. Full chemical resistance is achieved after 7 days.