Product Details
ARDEX LM 5 L
Latex Based Light Levelling Compound
- For internal applications
- Suitable for carpets, all kinds of elastic floor coverings and tiles
- • Extremely light
- • Applicable from 2 to 20 mm in a single coa
- • High strength at an early stage
- Very fast hardening, walkable after 3 hours
- Ready to receive all kind of floor coverings after 24 hours (18 – 20°C)
- Fast drying due to ARDURAPID EFFECT
Scope of use:
Interior, floor.
Underlay for floor elastic coverings, carpet, and tiles onto pretreated
deck areas. Very good adhesion to pretreated steel-, aluminum and
galvanized deck surfaces.
Properties
Grey powder consisting of special cements, selected fillers and easily dispersible synthetic powders. Mixing the powder with the emulsion leads to a smooth, good flowable mortar with excellent leveling properties. The mortar can be worked for approximately 20 – 30 minutes. It is open for foot traffic 3 hours after installation.
ARDEX LM 5 L hardens by hydration rapidly in all thickness layers (2 – 20 mm) to become a very light tension free compound that prevent practically the generation of cracks.
Packaging
Bags with 15 kg net powder
Bucket 7,8 kg emulsion
Storage & Shelf Life
Can be stored for approx. 6 month in dry rooms in originally sealed packaging
Mixing Ratio
7,8 l emulsion:15 kg powder
Bulk Density
approx. 0,61 kg/l
Fresh Mortar Weight
approx. 1,1 kg/l
Density of the Dried Compound
approx. 0,95 kg/l
Material Requirements
approx. 1,1 kg per m² and mm (powder + emulsion)
Working Time*
approx. 20 – 30 minutes
Walkability*
approx. 3 hours
Ready to Receive Floor Coverings*
After 24 hours
*All data is approximately based on laboratory test made at a temperature of +20°C and relative humidity of %65. Environmental conditions may change these values. Higher temperatures and lower relative humidity decrease these duration whereas lower temprature and higher relative humidty increases them.
Compressive Strength
after 1 day approx. 7 N/mm²
after 7 days approx. 10 N/mm²
after 28 days approx. 15 N/mm²
Tensile Bending Strength
after 1 day approx. 2,0 N/mm²
after 7 days approx. 4,0 N/mm²
after 28 days approx. 6,0 N/mm²
GISCODE
Powder GSCODE ZP1 = contains cement low chromate content
Emulsion GISCODE D1= dispersion solvent free
GHS/CLP
GHS07
Emulsion: none
GGVSEB/ADR
None
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.