Product Details
Loba CareRemover
Basic Cleaning Solution
- Removes heavy dirt and old maintenance layers
- Extends the lifespan of polished wood floors
- High concentration
- Universally applicable on a variety of floor types
- Protects the material and is pH neutral
LOBA® CareRemover – High-Concentration Cleaning Solution for Polished Floors
LOBA® CareRemover is a high-concentration, pH-neutral cleaning solution designed for polished wooden floors, cork coverings, linoleum, PVC, and rubber. It effectively removes old maintenance layers and stubborn dirt, increasing the lifespan of floors. The product is easy to use, suitable for both absorbent and non-absorbent surfaces, and can be applied using various cleaning methods.
Product Type
Basic cleaning solution for polished floor coverings. A high-concentration, pH-neutral cleaner that increases the lifespan of polished wood floors several times over. It deeply cleans old maintenance materials and heavy, stubborn dirt. It can also be used as a cleaning agent when highly diluted.
Areas of Use
Suitable for cleaning maintenance layers on water-resistant floor coverings such as polished wooden floors, cork coverings, linoleum, PVC, and rubber. LOBA® CareRemover can also be used on sensitive floors due to its pH-neutral formulation.
Important Considerations
- The product should be shaken well before use.
- Loose dirt and dust should be removed beforehand using a vacuum cleaner, broom, or mop.
- Depending on the level of dirtiness, the consumption rate is approximately 10-20 ml/m² = 50-100 m²/l. Cleaning can be done using a single-disc polishing machine with a LOBA green special pad or suitable pads in conjunction with an automatic scrubbing-vacuum machine.
- Stubborn dirt and shoe marks that cannot be removed with LOBA Cleaner can, in many cases, be cleaned with CareRemover diluted with water at a 1:10 ratio. The floor should be cleaned damp with the appropriate cleaning mop for the respective covering using this solution. Immediately after this process, rinse with clean water to neutralize.
- Stubborn stains can be cleaned with a brush or a LOBA green special pad and a single-disc polishing machine (the use of abrasive pads, sponges, etc., can cause scratches on the surface). The suitability for specific stains should be checked before full-surface application.
- Do not apply excessive amounts of cleaning solution to the surface. Excessive water usage and prolonged contact time may cause parquet, wooden floors, and cork coverings to swell; therefore, this should be avoided.
- The product is also suitable for use in automatic scrubbing-vacuum machines.
Packaging
Available in 1-liter and 10-liter packages.
Shelf Life and Storage
Can be stored for approximately 36 months in its original unopened packaging in a cool environment between +5°C and +25°C, away from frost.
Material Requirements
Approximately 50-100 m²/l
pH
8.2
GISCODE
GU60
Frequently Asked Questions About LOBA® CareRemover
What is LOBA® CareRemover?
LOBA® CareRemover is a high-performance, two-component, solvent-free epoxy resin designed as a filler and primer with excellent penetration for concrete and mortar surfaces. It serves as a protective and hardening agent for concrete and mortar floors, fills cracks, and prepares surfaces for subsequent epoxy and polyurethane coatings.
What are the benefits of using LOBA® CareRemover?
Using LOBA® CareRemover offers several benefits:
- High Concentration: Effectively increases the lifespan of polished wood floors by deeply cleaning old maintenance materials and removing heavy, stubborn dirt.
- pH-Neutral: Safe for sensitive floors, minimizing the risk of damage during the cleaning process.
- Versatile Application: Can be used both as a high-concentration cleaner and as a cleaning agent when highly diluted, making it suitable for various cleaning needs.
- Eco-Friendly: Solvent-free and low-emission formulation ensures minimal environmental impact.
- Ease of Use: Suitable for use with single-disc polishing machines, LOBA green special pads, and automatic scrubbing-vacuum machines.
What types of floor coverings can LOBA® CareRemover be used on?
LOBA® CareRemover is ideal for cleaning maintenance layers on water-resistant floor coverings such as:
- Polished wooden floors
- Cork coverings
- Linoleum
- PVC
- Rubber
Its pH-neutral formulation also makes it suitable for sensitive floors.
How do I use LOBA® CareRemover?
To effectively use LOBA® CareRemover, follow these steps:
- **Shake Well:** Ensure the product is thoroughly shaken before use.
- **Remove Loose Dirt:** Use a vacuum cleaner, broom, or mop to eliminate loose dirt and dust from the floor surface.
- **Apply the Cleaner:** Depending on the level of dirtiness, apply approximately 10-20 ml/m² (50-100 m²/l) using a single-disc polishing machine with a LOBA green special pad or suitable pads in conjunction with an automatic scrubbing-vacuum machine.
- **Tackle Stubborn Dirt:** For stubborn dirt and shoe marks, dilute CareRemover with water at a 1:10 ratio. Clean the floor damp with an appropriate mop, then rinse with clean water to neutralize.
- **Avoid Excessive Application:** Do not apply excessive amounts of the cleaning solution to prevent swelling of parquet, wooden floors, and cork coverings.
What is the recommended dilution for cleaning stubborn dirt?
For stubborn dirt and shoe marks that cannot be removed with LOBA® CareRemover, dilute the product with water at a 1:10 ratio. Clean the floor damp with the appropriate cleaning mop for the respective covering using this solution, and immediately rinse with clean water to neutralize.
What are the important precautions when using LOBA® CareRemover?
When using LOBA® CareRemover, keep the following precautions in mind:
- Shake Before Use: Ensure the product is well-shaken to maintain consistency.
- Remove Loose Dirt First: Always remove loose dirt and dust before applying the cleaner.
- Avoid Excessive Application: Do not apply too much solution to prevent damage to the flooring.
- Use Appropriate Tools: Utilize single-disc polishing machines with LOBA green special pads or suitable pads for effective cleaning.
- Test for Stains: Check the suitability for specific stains before full-surface application to avoid scratches.
How should I store LOBA® CareRemover to maintain its effectiveness?
To maintain the effectiveness of LOBA® CareRemover, store it in its original, unopened packaging in a cool, dry environment with temperatures between +5°C and +25°C. Keep the adhesive away from frost, direct sunlight, and heat sources. Once opened, ensure the containers are tightly sealed to prevent moisture contamination and use the product shortly thereafter.
What is the shelf life of LOBA® CareRemover?
LOBA® CareRemover has a shelf life of approximately 36 months when stored correctly in its original, unopened packaging in a cool environment between +5°C and +25°C, away from frost.
What is the pH of LOBA® CareRemover?
The pH of LOBA® CareRemover is 8.2, making it suitable for sensitive floors due to its pH-neutral formulation.
What is the consumption rate of LOBA® CareRemover?
The consumption rate for LOBA® CareRemover is approximately 10-20 ml/m², equating to 50-100 m²/l. This rate may vary based on the level of dirtiness and the surface texture.
Can LOBA® CareRemover be used with automatic scrubbing-vacuum machines?
Yes, LOBA® CareRemover is suitable for use in automatic scrubbing-vacuum machines, enhancing the efficiency and effectiveness of the cleaning process.
How do I prepare the floor before applying LOBA® CareRemover?
Before applying LOBA® CareRemover, ensure that the floor surface is clean, dry, and free from loose dirt and dust. Use a vacuum cleaner, broom, or mop to remove any debris to achieve optimal cleaning results.
How do I clean up after using LOBA® CareRemover?
After using LOBA® CareRemover, especially when dealing with stubborn stains, rinse the floor with clean water to neutralize the solution. For excess product, use an appropriate cleaning mop to remove any residue and ensure the floor is left clean and dry.
What is the cleaning process for stubborn stains with LOBA® CareRemover?
For stubborn stains that cannot be removed with standard cleaning, dilute CareRemover with water at a 1:10 ratio. Clean the floor damp using the appropriate mop for the floor covering, then immediately rinse with clean water to neutralize the solution. For extremely stubborn stains, use a brush or LOBA green special pad with a single-disc polishing machine, ensuring not to use abrasive pads that could scratch the surface.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.