Product Details
ARDEX AF 480 MS
MS Parquet Adhesive
- Best combination of elasticity and rigidity
- High adhesion and shear strength
- Suitable for solid floor coverings
- Single-component, ready to use
- High temperature resistance, suitable for areas exposed to direct sunlight
- Covers up to 42 m² with one bucket
ARDEX AF 480 MS: High-Performance Adhesive for Wood and Cork Floors
ARDEX AF 480 is a solvent-free, low-odor, and low-emission MS polymer adhesive suitable for all types of wood and cork flooring. Ideal for commercial and residential areas, it complies with TS EN 13489 standards and is compatible with sound insulation mats, wheelchairs, and underfloor heating systems.
Areas of Use
Suitable for indoor applications on floors.
ARDEX AF 480 is ideal for installing all types of wood and cork floor coverings. It can be used in both commercial and residential settings.
It is suitable for bonding ready-made laminate floors, mosaic parquet, multilayer parquet, as well as small and large-sized solid parquet*.
*Applicable for solid parquet with widths up to 18 cm and oak parquet up to 20 cm.
It is suitable for use on both absorbent and non-absorbent surfaces, as well as over ARDEX sound insulation and separation mats.
ARDEX AF 480 is also compatible with all latex and cement-based ARDEX floor filling and leveling products, and suitable for use with wheelchairs and underfloor heating systems.
Product Composition
ARDEX AF 480 is a solvent-free, low-odor adhesive that solidifies upon reacting with moisture, based on MS polymer technology.
Certified for very low emissions, meeting EMICODE EC 1 PLUS requirements.
Packaging
18 kg bucket
Shelf Life and Storage
Can be stored for approximately 12 months in its original unopened packaging in a cool, dry environment. Opened packaging should be tightly sealed after use.
Raw Material Composition
Silane-modified polymer-based
Material Requirements
Refer to the recommended tool and consumption section.
Application Temperature
Above +15°C
Relative Humidity (RH)
Below 75%
Ventilation Time
None required
Working Time*
Approximately 40 minutes
Drying Time*
Approximately 12-24 hours
Surface Workability*
Can be worked on approximately 24 hours after application.
*Environmental and weather conditions may affect these values. High temperatures and lower relative humidity shorten these times, while lower temperatures and higher relative humidity extend them. The specified values are measured in the laboratory at +18°C and 65% relative humidity.
Cleaning
With water before drying.
Compatibility with Underfloor Heating Systems
Yes, suitable.
EMICODE
EC 1 PLUS – Very low emissions
Frequently Asked Questions About Flooring Adhesives
What are the different types of flooring adhesives available?
There are several types of flooring adhesives, including water-based adhesives, solvent-free adhesives, silane-modified polymer (SMP) adhesives, and epoxy adhesives. SMP adhesives like ARDEX AF 480 are renowned for their high performance and durability, making them ideal for bonding a wide range of flooring materials in both residential and commercial settings. Water-based adhesives are popular for their low odor and environmental friendliness, while solvent-free adhesives offer strong bonding capabilities without the use of harmful chemicals. Epoxy adhesives provide exceptional resistance to chemicals and moisture, suitable for industrial applications.
How do I choose the right flooring adhesive for my project?
Choosing the right flooring adhesive depends on several factors, including the type of flooring you’re installing, the surface conditions, and the specific requirements of your project. Consider factors such as adhesive strength, drying time, odor levels, and environmental impact. For example, ARDEX AF 480 is an excellent choice for bonding wood and cork flooring due to its high-performance, solvent-free, and low-odor formulation, making it ideal for professional-quality and durable installations.
What are the benefits of using low-odor flooring adhesives?
Low-odor flooring adhesives are preferred for both residential and commercial indoor applications as they minimize unpleasant smells during installation, creating a more comfortable environment for both installers and occupants. Additionally, low-odor adhesives like ARDEX AF 480 are often more environmentally friendly, reducing the release of harmful volatile organic compounds (VOCs) into the air.
Can flooring adhesives be used on underfloor heating systems?
Yes, many high-performance flooring adhesives are compatible with underfloor heating systems. These adhesives are designed to accommodate the expansion and contraction caused by temperature changes, ensuring a durable and stable bond. ARDEX AF 480, for example, is suitable for use with underfloor heating, providing reliable adhesion without compromising heating efficiency.
How should I store flooring adhesives to maintain their effectiveness?
Proper storage is essential to preserve the quality of flooring adhesives. Store adhesives in their original, unopened containers in a cool, dry environment away from direct sunlight and extreme temperatures. ARDEX AF 480 has a shelf life of approximately 12 months when stored correctly. Once opened, ensure the containers are tightly sealed to prevent moisture contamination and extend the adhesive’s usability.
What safety precautions should I take when working with flooring adhesives?
When using flooring adhesives, it’s important to work in a well-ventilated area to avoid inhaling fumes, even if the adhesive is low-odor. Wear appropriate protective gear such as gloves and safety glasses to prevent skin and eye contact. Additionally, follow the manufacturer’s instructions and safety data sheets to ensure safe handling and application. Products like ARDEX AF 480 are designed to be safer alternatives with low emissions, but standard safety practices should still be followed.
How long does it take for flooring adhesive to dry and set?
The drying and setting time for flooring adhesives can vary based on the product and environmental conditions. Typically, water-based adhesives dry within 30 minutes to an hour, while solvent-free adhesives may take longer. SMP adhesives like ARDEX AF 480 do not require ventilation time and can be applied directly, offering a working time of approximately 40 minutes and drying time of around 12-24 hours. Factors such as temperature, humidity, and ventilation can affect drying times.
Are there environmentally friendly flooring adhesive options available?
Yes, there are environmentally friendly flooring adhesives that are water-based and solvent-free, reducing the emission of harmful VOCs. These adhesives are certified by standards such as EMICODE EC 1 PLUS, ensuring very low emissions and compliance with strict environmental regulations. ARDEX AF 480 is an example of an eco-friendly adhesive that contributes to healthier indoor air quality and a more sustainable environment.
Can flooring adhesives be used on various types of flooring materials?
Many flooring adhesives are versatile and can be used on a wide range of flooring materials, including wood, cork, textile, PVC, linoleum, and rubber coverings. It’s important to select an adhesive that is specifically formulated for the type of flooring you are installing to ensure optimal bonding and performance. ARDEX AF 480 is particularly effective for bonding wood and cork flooring due to its superior adhesion strength and versatility.
What are the best practices for applying flooring adhesive?
To achieve the best results when applying flooring adhesive, follow these best practices:
- Ensure the surface is clean, dry, and free from contaminants.
- Choose the appropriate trowel based on the substrate texture to ensure sufficient adhesive transfer.
- Apply the adhesive evenly using a notched trowel or roller.
- Maintain the recommended coverage rate for optimal bonding.
- Press the flooring material firmly into the adhesive to eliminate air pockets.
- Allow adequate drying time before subjecting the floor to load or use.
Following these steps helps ensure a strong and durable bond for your flooring installation. Products like ARDEX AF 480 are designed to make the application process easier and more efficient, ensuring professional-quality results.
Is ARDEX AF 480 compatible with other ARDEX system products?
Yes, ARDEX AF 480 is part of the ARDEX system and can be used in conjunction with all ARDEX latex and cement-based floor filling and leveling products. This compatibility ensures a seamless integration of products for comprehensive flooring solutions, enhancing the overall performance and durability of your flooring installation.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.