Product Details
ARDEX K 110
Self-Leveling Thin Floor Screed
- Cement-based
- Low emission
- Self-leveling coating material for smooth surfaces
- Can be applied manually or with a machine
- Low internal stress
- Easy to sand
- Suitable for wheelchair use
- Suitable for underfloor heating
- Applicable up to 10mm
Self-Leveling Thin Floor Screed for Smooth Surfaces – ARDEX K 110
ARDEX K 110 is a cement-based, low-emission, self-leveling thin floor screed suitable for smooth surfaces, manual or machine application, easy to sand, and compatible with wheelchair and underfloor heating systems. It can be applied up to 10mm.
Usage Areas
Applied indoors, especially on screed, concrete, and similar floors, for the smoothing, leveling, and correction of surfaces, under carpet, PVC, LVT, linoleum, rubber-based flexible floor coverings, and ceramic-tile coverings.
Product Content
A perfect blend of specially selected additives, fillers, and synthetic dispersion powders with a gray cement-based binder. When mixed with water, it forms a fluid, self-leveling, and smoothing mortar that can be worked for 20-30 minutes. The mortar hardens through hydration and quickly dries to form a low-tension surface.
Packaging
25 kg kraft bag
Shelf Life and Storage
Can be stored for approximately 12 months in a dry and cool environment in its original unopened packaging.
Şimdi bu bilgileri kullanarak TLDR, başlık, meta title, meta description ve focus keywords oluşturabiliriz.
Mixing Ratio
5.25 – 5.50 liters of water per 25 kg powder
Dry Powder Density
Approximately 1.4 kg/l
Fresh Mortar Density
Approximately 2.1 kg/l
Material Requirement
Approximately 1.8 kg powder/m²–mm
Working Time
Approximately 20 – 30 minutes
Walkable Time
Approximately 5-6 hours after application
Covering Time
Up to 3mm: approximately 1 day; over 3mm: an additional 1 day for each 1mm
*These values are approximate and calculated under laboratory conditions at +20°C and 65% relative humidity. Environmental and air conditions can alter these values. Higher temperatures and lower humidity shorten these times, while lower temperatures and higher humidity extend them.
Compressive Strength
Approximately 6.0 N/mm² after 1 day Approximately 20 N/mm² after 28 days
Flexural Strength
Approximately 1.5 N/mm² after 1 day Approximately 6.0 N/mm² after 28 days
Suitability for Wheelchair Use
Suitable
Suitability for Underfloor Heating
Suitable
GHS/CLP Classification
GHS 05, Corrosive
Signal Word
Danger
GGVSEV/ADR Classification
None
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information about self-leveling screed applications, especially ARDEX K 110, please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
What is self-leveling floor screed?
Self-leveling floor screed is a cement-based compound that is used to create a smooth, flat surface. It spreads evenly across the floor without the need for manual leveling, making it ideal for preparing surfaces for flooring materials such as carpet, PVC, and tile.
How do I apply self-leveling screed?
Self-leveling screed can be applied manually with a trowel or using a pump. Mix the screed with water according to the manufacturer’s instructions, pour it onto the floor, and allow it to spread evenly. The screed will level itself, creating a smooth surface.
Can I use self-leveling screed on concrete floors?
Yes, self-leveling screed is suitable for use on concrete floors. It is designed to adhere well to concrete, creating a smooth, level surface that is ideal for further flooring installations.
Is self-leveling screed suitable for underfloor heating?
Yes, self-leveling screed like ARDEX K 110 is suitable for use with underfloor heating systems. It provides a smooth and level surface that allows for efficient heat distribution.
How thick can I apply self-leveling floor screed?
The application thickness of self-leveling floor screed can vary, but products like ARDEX K 110 can be applied up to 10mm thick. Always refer to the product specifications for precise application guidelines.
How long does self-leveling screed take to dry?
The drying time for self-leveling screed can vary based on environmental conditions, for ARDEX K 110 it is walkable after approximately 5-6 hours and can be covered after 1 day for layers up to 3mm. Thicker layers will require additional drying time.
Can self-leveling screed be used with wheelchairs?
Yes, self-leveling screed like ARDEX K 110 is suitable for wheelchair use. It creates a smooth and durable surface that can withstand the demands of wheelchair traffic.
What are the benefits of using self-leveling floor screed?
Self-leveling floor screed provides several benefits, including a smooth, level surface for flooring installations, quick drying times, ease of application, and suitability for use with underfloor heating and wheelchairs. It also reduces internal stresses and is easy to sand.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.