SEIREPOX A/N

Mixing Ratio

As specified on the packaging

Density

Approximately 1.4 kg/l

Consumption

Approximately 1.4 kg/m²

Working Time

Approximately 30 minutes

Recoating Time

Approximately 6 hours

Full Cure and Chemical Resistance

After 7 days

Flexural Strength

30 N/mm² (EN 196-1)

Compressive Strength

Approximately 60 N/mm² (EN 196-1)

Technical Data Sheet

IMPORTANT NOTE

This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.

How can I ensure strong bonding for various construction materials?

SEIREPOX A/N is a solvent-free, two-component epoxy adhesive that provides excellent adhesion to a wide range of construction materials, including concrete and steel.

What are the key applications for SEIREPOX A/N?

This epoxy adhesive is ideal for both indoor and outdoor use, horizontal and vertical applications, bonding hardened concrete, steel-to-steel, steel-to-concrete, and installing illuminated airport signage and traffic signs.

How do I use SEIREPOX A/N for anchoring and fastening?

Mix the components according to the specified ratio on the packaging. Apply the adhesive to slightly damp surfaces if necessary. The working time is approximately 30 minutes, and it cures without shrinkage.

What are the benefits of using SEIREPOX A/N?

SEIREPOX A/N offers high mechanical strength, good chemical resistance, and resistance to water, frost, and weather conditions. It is solvent-free and cures without shrinkage.

What is the shelf life and storage condition for SEIREPOX A/N?

SEIREPOX A/N can be stored for up to 12 months in its original unopened packaging in a dry place at temperatures between +5°C and +30°C. Keep away from frost, direct sunlight, and heat sources.

How can I bond steel to concrete effectively?

Using a high-strength epoxy adhesive like SEIREPOX A/N ensures strong bonding between steel and concrete, providing excellent adhesion and durability.

What is the best adhesive for anchoring and fastening applications?

SEIREPOX A/N is an ideal choice for anchoring and fastening due to its high mechanical strength, excellent adhesion, and resistance to chemicals and weather conditions.

How do I ensure an adhesive is safe for outdoor applications?

Choose a product like SEIREPOX A/N, which is resistant to water, frost, and weather conditions, ensuring long-lasting performance in outdoor environments.