Product Details
ARDEX WA
Epoxy Adhesive, Grey
- For bonding ceramic, clinker, mosaic, and similar tiles
- High bonding strength
- Resistant to chemical effects
- Solvent-free
- Long working time
- Easier application and cleaning compared to alternatives
- Resistant to water and all weather conditions
- Can also be used as grout
Usage Areas
For indoor and outdoor use.
Suitable for areas where chemical exposure makes cement-based adhesives unsuitable, such as food and beverage factories, canteens, kitchens, slaughterhouses, swimming pools, spas, battery rooms, and similar environments.
Product Type
A high-strength epoxy-based adhesive composed of a pasty resin and hardener. The 4 kg package contains 3 kg of resin and 1 kg of hardener.
Once cured, ARDEX WA Epoxy Adhesive becomes resistant to water, frost, and weather conditions, providing high strength and adhering firmly to suitable substrates such as concrete, cement screeds, cement plaster, terrazzo, and old ceramic surfaces.
Packaging
4 kg bucket (3 kg component A resin + 1 kg component B hardener)
Shelf Life and Storage
Can be stored for approximately 18 months in its original unopened packaging, protected from sunlight and frost, in a dry and cool environment.
Mixing Ratio
Mixed by combining the 3 kg component A and 1 kg component B provided in the package.
Fresh Mortar Density
Approximately 1.5 kg/l
Material Requirements
Depending on the surface condition and the trowel size used:
- For 3 x 3 x 3 mm trowel size: 1.5 kg/m²
- For 6 x 6 x 6 mm trowel size: 2.7 kg/m²
- For 8 x 8 x 8 mm trowel size: 3.7 kg/m²
Working/Pot Life*
Approximately 60 minutes
Open Time*
Approximately 80 minutes
Adjustability Time*
Approximately 60 minutes
Walkable Time*
Approximately 12 hours
Mechanical Loading Time
Approximately 24 hours
Wall Grouting Time*
Approximately 8 hours
*These are approximate values calculated in a laboratory environment at +20°C and 65% relative humidity. Environmental and weather conditions can affect these values. Higher temperatures and lower relative humidity shorten these times, while lower temperatures and higher relative humidity extend them.
Compressive Strength
- After 1 day: Approximately 60 N/mm²
- After 28 days: Approximately 70 N/mm²
Flexural Strength
- After 1 day: Approximately 35 N/mm²
- After 28 days: Approximately 43 N/mm²
EMICODE
EC 1 – Very Low Emission
GHS/CLP Classification
Hardener Component:
- GHS 07 “Irritant”
- GHS 09 “Environmental Hazard”
- Signal Word: Caution
Resin Component:
- GHS 05 “Corrosive”
- GHS 07 “Irritant”
- GHS 09 “Environmental Hazard”
- Signal Word: Danger
GGVSEV/ADR Classification
Hardener Component:
- Class 8, UN 2735, amines, liquid, n.o.s.
Resin Component:
- Class 9, UN 3082, III, environmentally hazardous substance, liquid, n.o.s.
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information about tile adhesive application, especially ARDEX WA, please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
What is ARDEX WA and what are its main features?
ARDEX WA is a high-strength epoxy adhesive and grout designed for both bonding and grouting ceramic tiles, glass mosaics, and natural stones. It is chemically resistant, suitable for wet areas, and offers high bond strength.
What surfaces can ARDEX WA be used on?
ARDEX WA is ideal for walls and floors in environments exposed to chemicals, such as food and beverage factories, kitchens, swimming pools, spas, and battery rooms.
Is ARDEX WA suitable for outdoor applications?
Yes, ARDEX WA is UV resistant, water, frost, and weather-proof, making it suitable for outdoor use.
What are the advantages of using ARDEX WA over traditional adhesives and grouts?
ARDEX WA offers superior chemical resistance, high bond strength, and durability, making it ideal for demanding environments. It prevents staining and ensures a long-lasting, professional finish.
What is the working time for ARDEX WA?
The working time for ARDEX WA is approximately 60 minutes, with an open time of about 80 minutes and an adjustability time of approximately 60 minutes.
How long after application can the surface be walked on or grouted?
The surface can be walked on approximately 12 hours after application. Full mechanical loading is possible after 24 hours, and wall grouting can be done after approximately 8 hours.
What is the shelf life and storage conditions for ARDEX WA?
ARDEX WA can be stored for approximately 18 months in its original unopened packaging, protected from sunlight and frost, in a dry and cool environment.
Why should I use ARDEX WA instead of conventional adhesives and grouts?
ARDEX WA provides exceptional chemical and stain resistance, high bond strength, and long-term durability. It is ideal for environments where traditional adhesives and grouts may fail, ensuring a reliable and professional finish.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.