Product Details
ARDEX X 5 T
Ceramic-Porcelain Tile Adhesive, Gray
- Water-resistant
- Frost-resistant
- High strength
- Easy and comfortable application consistency
- Long working time
- Wide range of applications
- Flexible
Application Areas
Ideal for both interior and exterior use, ARDEX X 5 T can be applied on walls and floors. It is suitable for bonding ceramic, granite-ceramic, tiles, cotto, moisture-resistant marble and natural stone, porcelain tiles, glass mosaics, and insulation panels. Perfect for high-traffic residential areas, shopping centers, commercial buildings, schools, hospitals, terraces, underwater areas, wet rooms such as bathrooms, underfloor heating systems, and building facades (up to 3 meters high).
Product Type
A thin-bed adhesive mortar containing special additives to enhance cement, filler material, flexibility, non-slip properties, extended working time, and adhesion strength. When mixed with water, it forms a spreadable adhesive that becomes water and weather-resistant within a few days of curing. ARDEX X 5 T ensures strong, durable adhesion on substrates like concrete, cement and calcium sulfate screeds, plaster, cement and gypsum plastered walls, and gypsum boards.
Packaging
25 kg kraft bag.
Shelf Life
Approximately 12 months in original, unopened packaging, stored in a dry, cool place away from sunlight and frost.
Mixing Ratio
7.5 liters of water per 25 kg of powder.
Dry Powder Density
Approximately 1.5 kg/l.
Fresh Mortar Density
Approximately 1.7 kg/l.
Material Consumption
Depending on surface condition and trowel size:
- 3 x 3 x 3 mm trowel: 2.2 kg powder/m²
- 6 x 6 x 6 mm trowel: 2.7 kg powder/m²
- 8 x 8 x 8 mm trowel: 3.2 kg powder/m²
Working/Pot Life
Approximately 3 hours.
Open Time*
Approximately 30 minutes.
Adjustability Time*
Approximately 15-20 minutes.
Walkable Time*
Walkable and groutable after approximately 24 hours.
Wall Grouting Time*
Groutable after approximately 8 hours.
*Approximate values calculated under laboratory conditions at +20°C and 65% relative humidity. Ambient and substrate conditions can affect these times. Higher temperatures and lower humidity shorten these times, while lower temperatures and higher humidity extend them.
Wheelchair Suitability
Suitable.
EMICODE
EC 1 PLUS – Very low emission.
GHS/CLP Classification
GHS 05, Corrosive – Hazard.
GGVSEV/ADR Classification
None.
IMPORTANT NOTE
This Frequently Asked Questions (FAQ) section is prepared for general information purposes and does not constitute a definitive guide. For the most accurate and up-to-date information about tile adhesive application, especially ARDEX X 5 T, please refer to the product technical data sheets. For detailed information about product features, usage conditions, and application methods, we recommend consulting the ARDEX Turkey technical team. Before any application, obtaining expert advice on surface preparation and product selection will increase the success of the application.
How do I choose the right tile adhesive for my project?
Consider the type of tiles, the surface you’re bonding to, the environmental conditions, and specific requirements like flexibility and water resistance. Always refer to the product specifications.
What is the difference between thin-set mortar and tile adhesive?
Thin-set mortar is a type of tile adhesive designed to be applied in a thin layer, typically 3-6 mm thick, and is used for bonding tiles to floors and walls.
What types of materials can ARDEX X 5 T bond?
ARDEX X 5 T can bond ceramic, granite-ceramic, tiles, cotto, moisture-resistant marble, natural stone, porcelain tiles, glass mosaics, and insulation panels.
Is ARDEX X 5 T suitable for high-traffic areas?
Yes, its high bonding strength and durability make it suitable for high-traffic areas such as shopping centers, commercial buildings, schools, and hospitals.
Can ARDEX X 5 T be used in wet environments?
Yes, ARDEX X 5 T is water and frost resistant, making it suitable for wet areas like bathrooms and terraces, as well as underwater areas.
How flexible is ARDEX X 5 T?
ARDEX X 5 T offers excellent flexibility, accommodating movement and preventing cracks.
What is the working time for ARDEX X 5 T?
The product has a working time of approximately 3 hours, allowing ample time for application and adjustments.
What is the mixing ratio for ARDEX X 5 T?
Mix 25 kg of powder with 7.5 liters of water to achieve the optimal consistency.
How long after application can the surface be walked on or grouted?
The surface can be walked on and grouted after approximately 24 hours, with wall grouting possible after about 8 hours.
Is ARDEX X 5 T suitable for use with underfloor heating systems?
Yes, ARDEX X 5 T is compatible with underfloor heating systems and resistant to high temperatures and humidity.
What are the environmental benefits of ARDEX X 5 T?
ARDEX X 5 T is environmentally friendly with very low emissions, making it a safe choice for both installers and building occupants.
Do you have any questions about this product?
You can ask your questions about this product by filling out our contact form.